TRM Packaging All articles
Operations & Efficiency

Fewer Boxes, Better Parcels: Trimming a Packaging Range Without Losing Protection

TRM Packaging
Fewer Boxes, Better Parcels: Trimming a Packaging Range Without Losing Protection

The range nobody planned

Very few warehouses set out to hold nineteen carton sizes, four tape widths and a pallet of void fill that seemed like a bargain in 2023. Ranges grow by accretion. A customer asks for a particular size, a new product line arrives with its own protection requirements, a supplier offers a favourable price on a case quantity, and the shelf fills up a little more. Each decision is defensible on its own. Together, they produce a stock profile that consumes floor space, complicates picking and makes every new starter's first week harder than it needs to be.

The proposition here is not minimalism for its own sake. A packaging range should be as large as protection, scanability and customer experience genuinely require, and no larger. The work is in distinguishing between the sizes that earn their shelf space and the ones that survive through inertia.

Start with despatch data, not the catalogue

Most rationalisation exercises begin with a stock list and an opinion. A better starting point is a representative extract from the despatch system: order numbers, product dimensions, packed weight, carton used, carrier service and, where it exists, the packaging cost recorded against each consignment.

A period of eight to twelve weeks usually captures a fair picture, provided it includes at least one busy trading spell. From that extract, three measures do most of the useful work:

The output should be a table that shows, size by size, how often it is used, what it carries and what it costs to use. Sizes that appear a handful of times across the whole period merit particular scrutiny; a carton used twice a quarter is rarely worth a dedicated shelf position.

Where consolidation is genuinely safe

Consolidation becomes risky when it is driven by a desire to reduce the count rather than by evidence about the goods. Two conditions make it reasonably safe: the replacement size must accommodate the goods with appropriate internal clearance, and it must not compromise the protection that transit actually demands.

In practice, most safe consolidation sits in adjacent sizes. A 3 and a 4 in the same board grade, a small and a medium in the same bag format, two tape widths either side of a 48mm standard: these are the natural candidates. Collapsing across a wider gap, such as removing an intermediate size entirely, asks more of the packaging specification and should be tested rather than assumed.

Board strength deserves attention throughout. A carton that takes on slightly more volume, or carries goods that sit differently within it, may need a different flute or edge-crush grade to perform as its predecessor did. Reducing the range while quietly reducing board specification is not a saving; it is a transfer of risk to the carrier network and, ultimately, to the customer.

What should never be absorbed

Some sizes exist for reasons that a volume count will never reveal. Despatch data captures frequency and cost, but it does not always capture:

These should be recorded as protected sizes with a written justification, and reviewed periodically rather than removed in a general sweep. The point of the exercise is a defensible range, not a short one.

Proving the smaller range before it goes live

A consolidated range should be validated in the same way as any new specification. Select a sample of real orders that would previously have used the retired sizes, pack them in the proposed replacements, and put them through the journey they will actually take: the bench, the bagging line or sortation, the carrier's network, and the doorstep.

Two practical checks are worth building into that trial. The first is label geometry: confirm that the smaller or differently proportioned panel still gives the label a flat, unobstructed area with adequate quiet zones for first-time scanning. The second is a bench timing exercise. A size that is theoretically suitable but adds fifteen seconds to every pack is not a neutral substitution.

Run the trial for a defined period, keep the superseded sizes available, and record any exceptions. A short list of orders that could not be accommodated is far more valuable than a general impression that the change went well.

The commercial arithmetic: minimum order quantities, space and picking

Fewer sizes do not automatically mean lower costs. Consolidation concentrates spend, which can improve the price position on the surviving lines, but it may also push a business above a minimum order quantity it previously avoided or into a longer lead time. Both should be modelled before any size is retired.

The operational gains are usually more reliable than the purchasing ones. A smaller range occupies less racking, which in many UK units is the constraint that matters. It shortens the walk on the picking route, reduces the frequency of the wrong-size selection at the bench, and makes stock counts faster and less error-prone. It also simplifies training, which is worth more than it appears during a temporary peak crew.

There is a further consideration now familiar to most packaging teams: the data that must be gathered on what is placed on the market. A tidier range makes that reporting easier to reconcile, simply because there are fewer lines to attribute.

Sequencing the change

A workable sequence is to audit in the quiet period, agree protected sizes with operations and account management, trial replacements over four to six weeks, and retire only after the trial has produced evidence. Avoid introducing a consolidated range at the same time as a carrier change or a warehouse move; the interactions will obscure what caused any problem that arises.

A realistic end point

Most businesses that undertake this exercise do not end up with five sizes. They end up with a range that is smaller by perhaps a quarter to a third, better understood by the people who use it, and supported by a written note explaining why each remaining size exists. That is a modest outcome, but it is one that holds, and it leaves the bench calmer than it found it.

All Articles

Related Articles

The Unit That Ships: Rethinking Packaging When Wholesale Cases Give Way to Single Parcels

The Unit That Ships: Rethinking Packaging When Wholesale Cases Give Way to Single Parcels

Empty Centimetres, Real Invoices: A Chargeable-Weight Audit for UK Packing Benches

Empty Centimetres, Real Invoices: A Chargeable-Weight Audit for UK Packing Benches

The Third Handling: Packaging for Parcel Lockers and Click-and-Collect Counters

The Third Handling: Packaging for Parcel Lockers and Click-and-Collect Counters